Beveled Wood Siding Has A Surfaced Side And A Rough Side

The back side is a skip surfaced face and may be smooth or rough with imperfections.

Beveled wood siding has a surfaced side and a rough side.

They are lapped to shed water. The board edges are usually beveled but other styles that include flush jointed reveal and radius joints are also available. Lumber milled this way has a rough yet uniformly even surface. It is lumber that has been resawn at an angle resulting in two pieces.

In fact rough is often used because it has the raised grain of the wood has a nice appearance for a featured section especially when stained. S1s2e stands for smooth 1 side and 2 edges. All three sizes thin standard thick are sold as a nominal 1 board. Rough sawn lumber is the name given to lumber milled on a band saw.

Tongue groove siding pattern. This bevel lap siding has a rough face and is graded on this face. One edge has a thick butt while the other edge is thinner. Bevel siding also referred to as clapboard siding is a very popular wood siding product.

Thin bevel just under 1 2 butt standard bevel just under 3 4 butt and thick bevel 7 8 to just over 1 butt. Three main bevel siding thickness are usually available. It will be 11 16 of an inch thin by a 1 2 smaller than its title since it has been planned on the one face and the two edges. Bevel wood siding pattern.

White pine is a durable wood that is often used outside but must be primed and painted to hold up to the exterior elements.